• Can
be installed over all structurally solid
subfloors.
• If glueing down floor, glue
down ThermoFloor™ under floor warming system,
then glue down the wood floor.
• Make sure old vinyl floors
are adhered tightly to a level, structurally
solid subfloor, and are free from excessive
wax, grease or sealants.
• Lay vapor barrier if installing
over a slab on grade. Use a 6 mil (.006")
film.
• Roll
out our radiant floor warming pads and arrange
to fit your heated area.
• Fill in non-heated areas with
standard Insulayment™ padding or generic
underlayment.
• Run
20' lead wires from the end of each pad
to the electrical box.
• Duct-tape
pad seams together.
• Select thermostat control.
• Connect
multiple under floor warming pads in parallel
to one thermostat.
• Cover
with finished flooring (follow flooring manufacturer's
instructions).
• Detailed, easy-to-use instructions
are provided with your floating floor
radiant floor warming order.
